DLS RXT6 – compact tube subwoofer

The RXT6 is a passive very compact subwoofer enclosure with our new RXW6, 6,5” driver that works very well in this small 4,5 litres sealed enclosure.

DLS RXT6

Covered with black felt mat of the highest quality. Fastening bracket is included.
The small RXT6 can be mounted under the dash board on the passenger side.
The best result is normally achieved when installed under the dashboard directed to the right, but feel free to try other places.

How to use the RXT6 in combination with an external amplifier like XM20 or others.

  1. Install the bass tube under the dash board in the front of the car. (It does not perform so well in the trunk).
  2. Set the amplifiers LPF crossover to 50 or 60 Hz.
  3. Set the amplifiers gain to 50 or 60% (half or a bit more)
  4. Set the head units bass control to flat (0) and disconnect loudness, bass boost etc.

This will give the best performance.

  • Power handling capacity: 300 Watt
  • Max power handling capacity: 500 Watt
  • Impedance: 4 ohm
  • Woofer size: 6,5” / 165 mm
  • Dimension: (W x D x H) Length 33 cm
  • Diameter of tube: 18 cm
  • Recommended amplifier: Max 300 W, min 140 W
  • Rec. crossover point: Low Pass 50 – 60 Hz
  • Weight: 3,55 kg / 7,8 lbs

 

DLS RXT6 Datasheet

 For more information visit www.dls.s