ETON launches new POW Series

The newly developed POW+ series replaces the extremely successful POW series. A significant increase in terms of
efficiency and tweeter performance is the result of many years of development. The already known cone from the
previous series, elaborately designed, 2-layer fiberglass / paper cone with acoustically damping properties is also used
in the + series: its extremely stable, mechanical rigidity is the guarantee for impulse-true and precise music reproduction.
The extremely powerful ferrite magnet with the large core bore and the gloss-turned T-joke, which ensure optimum
cooling of the motor. It powerfully drives the lightweight and torsionally stiff cone. The specially shaped spider reduces
wobble effects and allows the driver to perform with pulse accuracy. The stiffened, powder-coated metal basket was
also provided with ventilation openings, these guarantee faster heat dissipation and reduce compression effects at high
levels. The loadable 25 mm coil in the 3 Ohm winding method offers even at low amplifier power (operation on the
series head unit) a high efficiency with 94.3 dB (2.83V) !

The new POW+ series impresses with its new CXS28+ tweeter unit: a 28 mm tweeter in the smart installation dimension of a 25 mm tweeter – this means more power in the lower treble range with the same installation dimension! Due
to the large 28 mm voice coil in combination with an extremely compact coupling volume, a performance increase in
the lower tweeter could be achieved, thus a deeper separation is possible. The new design has a resonant frequency of
1300 Hz, a full 500 Hz lower than its predecessor! A deep separation in active mode (already from 2.4 kHz/12 dB)
are the result, so the woofer / midrange blends even easier with the tweeter unit. For those who need a passive tuning –
a tweeter cable crossover consisting of a high-quality film capacitor is included in the set. Manufacture and development
Made in Germany!